Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Elmhurst?
Duct repair and sealing in Elmhurst typically costs $450 to $1,200 for most residential jobs, with simple leak sealing at the low end and larger repairs involving disconnected or crushed runs at the high end. A single-room repair or a small section of failed mastic often lands around $280 to $500. Whole-home sealing after a cleaning visit usually runs $700 to $1,600 depending on how many joints and connections need attention. Every job starts with an assessment, and the written estimate sets the final price.
We treat ductwork as part of one connected system: the ducts, the HVAC unit, the dryer vent, and the air your family breathes all affect each other. That’s why we handle duct repair & sealing alongside cleaning and sanitizing, so a leaky joint doesn’t quietly undo the work we just finished.
Key Takeaways
- Most Elmhurst duct repair and sealing jobs fall between $450 and $1,200.
- Small single-section repairs run $280 to $500; whole-home sealing runs $700 to $1,600.
- Leaking joints, disconnected runs, and crushed flex duct are the three most common problems we find.
- Our technicians have up to 13 years of experience and use professional-grade Rotobrush and Nikro equipment.
- Free estimates, and the written estimate sets the final price.
Duct Repair & Sealing Cost Breakdown (2026)
Here’s how the line items stack up for a typical Elmhurst home. These are estimates for the local market, not a quote. Your written estimate after assessment is the number that counts.
| Job | Typical Range | What It Covers |
|---|---|---|
| Assessment and leak test | Included with estimate | Inspection of accessible runs, joints, and connections |
| Sealing a few joints or connections | $280 – $500 | Mastic or foil tape on accessible leaks, small sections |
| Sealing most of the system | $700 – $1,200 | Sealing joints, boots, and plenum connections across the home |
| Reconnecting a detached run | $350 – $650 | Re-securing and sealing a duct that has pulled loose |
| Replacing a crushed or torn flex run | $400 – $900 | New section, proper support, sealed connections |
| Repairing damaged rigid ductwork | $600 – $1,500 | Patching or replacing sections of sheet metal duct |
| Whole-home sealing after a cleaning | $700 – $1,600 | Sealing every accessible joint, boot, and connection |
| Insulating exposed duct in unconditioned space | $300 – $800 | Wrap on runs in attics, crawlspaces, or garages |
| Combined cleaning plus sealing | $900 – $2,200 | Full cleaning, then sealing of the identified leaks |
What pushes a job toward the top of these ranges? Access is the biggest factor. Ducts buried under insulation in an attic or squeezed into a tight crawlspace take longer to reach and longer to seal properly. The number of separate leaks matters too, since each joint and boot needs individual attention. Material choice plays a role: mastic and mesh hold up better than tape over time, and we use what will last rather than what’s fastest. If a run has failed because of poor original installation, correcting the support and routing adds to the work.
What Affects Duct Repair & Sealing Pricing in Elmhurst
Elmhurst’s housing stock shapes this work in ways that don’t show up in a generic price list. A lot of the neighborhood’s homes are older two- and three-story buildings, many converted over the years, and ductwork in those buildings was often added or modified in stages. That history shows up as mismatched sections, improvised connections, and runs that don’t line up the way a newer system would.
- Age and layout of the ductwork. A house with original rigid metal duct in good shape needs less work than one where flex runs have been spliced in piecemeal over the years. The converted two-family homes common around Broadway and Whitney Avenue often have the second kind.
- Access. Ducts in a finished basement ceiling, a low crawlspace, or under attic insulation take more time to reach, and time is what most of the cost reflects. A straightforward run in an open basement is faster to seal.
- Attic and unconditioned-space ductwork. New York summers are humid and winters run cold. Ducts that pass through an unconditioned attic or crawlspace lose conditioned air twice over: through the leaks and through the uninsulated walls of the duct itself. Sealing plus insulating those runs costs more but pays back in comfort.
- Number of leaks and connections. Every boot, joint, and plenum connection is a potential leak. A system with a dozen small leaks costs more to seal than one with three, and the assessment tells us which is which.
- Whether the system is also being cleaned. Sealing after a cleaning is the sensible order: you don’t want to seal dust and debris in. Bundling the two into one visit usually costs less than two separate appointments.
- Condition of the HVAC unit and return path. A struggling blower or an undersized return can make leaks worse because the system pulls harder. If the unit itself needs attention, that’s a separate line in the estimate, but we flag it so you’re not paying to seal a system that’s fighting itself.
One thing we hear a lot in Elmhurst: “the upstairs never gets cool.” Often that isn’t the air conditioner. It’s a supply run that’s disconnected or crushed behind a wall, dumping cool air into a void instead of a bedroom. Finding it is the assessment; fixing it is usually a few hundred dollars, not a system replacement.
How to Save on Duct Repair & Sealing
The most reliable way to save is to catch leaks before they get worse. A small disconnected joint left alone lets conditioned air escape and pulls dust and attic air into the system, which then spreads through every room. Sealing early is a smaller job than sealing after the damage compounds.
- Get a free estimate before anything is scheduled. A written estimate tells you exactly what’s being repaired and what it costs, so you can compare like for like.
- Bundle cleaning and sealing into one visit. One assessment, one trip, one estimate. It’s cheaper than separating the two.
- Fix leaks before they spread. If you notice a room that’s always dusty or a vent with weak airflow, have it checked. A $300 sealing job today can be a $900 repair later if the duct detaches fully.
- Ask about sealing the accessible joints during a routine cleaning. If we’re already in the system, sealing the joints we can reach is a modest add-on rather than a standalone job.
- Keep the filter changed and the return clear. A clogged filter strains the blower and makes every leak worse. This costs nothing and protects the work you’ve paid for.
Call (855) 410-4866 to book a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Duct Repair & Sealing Belongs With Cleaning
Cleaning removes what’s built up inside the ducts. Sealing keeps it from coming back and keeps conditioned air where it belongs. Doing one without the other is a partial job. We use Rotobrush and Nikro professional-grade equipment for the cleaning side, then seal the joints and connections we’ve identified, so the system runs as it was meant to. That full-system approach is what separates a real repair from a surface clean.
For air quality concerns beyond dust and debris, we also work with product lines from Honeywell, Aprilaire, Abatement Technologies, and Guardsman. Those are installed by specialists, matched to your system, not dropped in as generic parts. If a homeowner has allergy, mold, or odor concerns, sanitizing after the repair and seal is the sensible sequence.
If you’re not sure where to start, the Elmhurst Air Duct Cleaning team can assess the whole system in one visit and tell you what actually needs doing. For the cleaning side on its own, that’s a separate service we handle as well.
FAQs – Duct Repair & Sealing Cost
How much does duct repair and sealing cost in Elmhurst?
Most Elmhurst homeowners pay between $450 and $1,200 for duct repair and sealing. Small jobs like sealing a few joints run $280 to $500. Whole-home sealing runs $700 to $1,600. Call (855) 410-4866 for an exact quote; estimates are free.
Is it cheaper to repair ductwork or replace it?
Repair is almost always cheaper than replacement. Sealing and reconnecting existing runs typically costs $300 to $1,200, while replacing a full duct system usually runs several thousand dollars and involves opening walls. Replacement only makes sense when the ductwork is extensively crushed, contaminated beyond cleaning, or badly undersized. Call (855) 410-4866 and we’ll tell you which side of that line your system is on.
How much does it cost to seal a leaking duct in Elmhurst?
Sealing a single leaking joint or connection typically costs $280 to $500, and sealing most of the accessible system runs $700 to $1,200. The exact figure depends on how many leaks the assessment finds and how easy they are to reach. Call (855) 410-4866 to book a free estimate.
Can you come today?
Same-day service is often available. We answer 24/7, and we dispatch fast from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 410-4866 and we’ll find the soonest slot.
Does sealing ducts actually lower energy bills?
Sealing leaking ducts keeps conditioned air in the rooms it’s meant for, so the system doesn’t work as hard to reach the thermostat setting. The savings depend on how leaky the system was and how much duct runs through unconditioned space. For homes in Elmhurst with attic or crawlspace ducts, the difference is usually noticeable. Call (855) 410-4866 for a free assessment before you commit to anything.
Pricing reflects the Elmhurst market as of 2026. Elmhurst Air Duct Cleaning offers free estimates – call (855) 410-4866. Written by the team at Elmhurst Air Duct Cleaning.
What Our Customers Say
"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Tim Quinn"Fair price and thorough work. They ran about an hour and a half past the estimated finish time, so don't schedule anything tight after."
- Neil Barrett"Did the dryer vent while they were here for a small add on price. The dryer now finishes a load in one cycle instead of two."
- Aisha Prince