Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Corona
Duct repair and sealing in Corona usually starts with a leak you can’t see. In the attached brick rowhouses packed into 11368, ducts run above drop ceilings, behind plaster and through cellars shared by two or three households, and the first sign of trouble is often uneven heat upstairs or a basement that smells of another apartment’s dinner. We work across Corona and know how these buildings are put together, from the tight side streets off Roosevelt Avenue to the stretch of low-rise apartment blocks toward Junction Boulevard. Our technicians have up to 13 years of experience tracing that ductwork and sealing it properly. Call (855) 410-4866. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Corona Homeowners Call Elmhurst Air Duct Cleaning for Duct Repair & Sealing
We handle air ducts, dryer vents, HVAC units, duct integrity and air sanitizing under one roof, so a Corona homeowner makes one call for assessment, cleaning, repair and treatment. Cleaning-only crews tend to stop when the ducts are clean and leave the crushed run or open joint where it was. We repair what we find.
Our technicians carry professional-grade equipment, including Rotobrush and Nikro systems, which means source removal and HEPA filtration on the same visit as the repair rather than a second appointment. For sealing and air quality work we use products from Honeywell, Aprilaire and Abatement Technologies, applied by people who know how to size and place them.
Corona buildings give us plenty to work with. The housing stock runs from early-1900s brick rowhouses to 1960s walk-ups, often with original sheet metal or early flex duct that’s been patched, re-taped and re-tapped for a new apartment over the years. We’ve learned to read that history before we quote. That’s why the estimate reflects what the ducts actually need, not a rough guess from the doorway. Duct repair is written per job from a written estimate, so the price you agree to is the price.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Corona
The work in Corona connects back to duct repair & sealing: sealing, flex repair, metal repair and insulation, handled by one company that reads the whole system.
Duct Sealing
Sealing is often the real fix in Corona, not the cleanup. When one basement furnace serves grilles in two apartments, every unsealed joint pulls in air from wherever the pressure takes it, and that can mean cooking odors from a neighboring unit drifting into your rooms. We seal the trunk takeoffs, plenum connections and register boots so the system moves the air it was designed to move. That matters in a shared building, where sealing one leak can restore proper flow across both units.

Flex Duct Repair
Crushed or disconnected flex runs above drop ceilings are everywhere in Corona’s converted basements. When a rowhouse gets carved into another unit, a run is often re-tapped to serve the new space and never properly joined. A crushed flex run chokes airflow to the rooms it serves; a disconnected one dumps conditioned air into the joist cavity. A camera inspection tells us which is which, and repairs usually mean rerouting, reconnecting or replacing the affected length rather than tearing out the whole line.

Metal Duct Repair
Original sheet-metal ductwork from the 1920s to the 1950s is common in Corona rowhouses, and it has a habit of losing its seal at the plenum and trunk takeoffs over time. Wraps of tape from a previous owner tend to be peeling by now. We reseal the joints with mastic sealant, close the gaps and get the trunk back to a working seal so the system stops leaking into the basement.

Duct Insulation
Corona’s humid summers and cold winters are tough on duct insulation, especially on runs that pass through unheated basement space. Failing insulation lets condensation form, which degrades joints and leaves the runs dripping. We replace damaged insulation on exposed trunks and flex runs so the ducts stay dry and the air arrives at the register at the temperature it left the unit.
Trusted Brands We Service in Corona
We work with the equipment and air quality brands we trust: Rotobrush and Nikro for cleaning and source removal, and Honeywell, Aprilaire, Abatement Technologies and Guardsman for filtration and sanitizing components. That mix matters in Corona’s older buildings, where a sealing job often needs a proper whole-home filter to take the dust load off the system once the leaks are closed. We don’t stock parts on a truck and don’t claim to; when a component needs replacing we specify a real brand and return with the correct part. Turnaround stays fast because we know what we’re ordering before we leave the basement.
Common Duct Repair & Sealing Problems We See in Corona Homes
- Crushed or disconnected flex above drop ceilings in converted basements. A run that was re-tapped for a new unit often ends up pinched against the ceiling grid or never joined to a boot at all. Both cut airflow and both waste energy.
- Split returns from one basement furnace feeding two apartments. The return plenum opens into grilles in two units, so sealing one leak still leaves air and cooking odors moving through the shared system. The repair scope here is defined by unit boundaries, not by how much duct there is.
- Seasonal condensation degrading taped or mastic joints on original sheet-metal runs. Corona’s sticky summers and cold winters work the joints loose, particularly at the plenum and trunk takeoffs where two different metals meet. A damp basement speeds that up.
- Abandoned runs left open after a unit was carved out. When an apartment is closed off or merged, old ducts often stay in the wall or the ceiling, connected to nothing and sealed to nothing. They leak air into cavities and pull dust into the system.
The pattern in Corona’s attached pre-war and mid-century housing is that the ducts were built for one household and later made to serve two or three. That’s why a cleaning visit here so often turns into a puzzle of which register belongs to which apartment, and why the sealing work usually ends up being the part that actually restores balanced airflow upstairs. Basements hold the furnace and return plenum for multiple units, and each household runs its own kitchen and its own cooking odors into that shared ductwork. Tracing it properly is a camera job, not a guess.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Corona, NY
Duct repair and sealing is priced per system by a written estimate, free on the assessment, and the estimate fixes the final price before any work begins. Typical Corona ranges for the repair work itself:
- Air leak repair at plenum and trunk joints: $250 – $600 per system
- Duct sealing of a full Corona rowhouse trunk and branch run: $400 – $900
- Flex duct repair or replacement of a crushed run above a drop ceiling: $200 – $500 per run
- Metal duct repair on original sheet-metal trunk: $300 – $750
- Duct insulation replacement on exposed basement runs: $200 – $550
The scope depends on how many units the system serves, how accessible the runs are above the ceiling or behind plaster, and whether a crushed flex line needs rerouting or just reconnection. A single-unit 1960s walk-up is usually at the low end. A three-family 11368 rowhouse where the return was split across two apartments pushes toward the higher end because the mapping takes longer. Sealing-only jobs on a clean, accessible system come in at the low end of each range.
We Also Serve Cities Near Corona
We cover the neighborhoods around Corona as well, and homeowners in nearby towns book the same repair and sealing service. If you’re just outside the Corona line, check our page for Corona to see what the work involves, then call for an estimate. We also serve Elmhurst, Rego Park, Jackson Heights and Middle Village, and we handle the same older attached housing and shared ductwork problems in each.
Serving Corona, NY – Our Local Coverage Area
We serve Corona and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Corona
Yes. Sealing a shared system means stopping the leaks at the plenum, trunk takeoffs and joints, not closing off the run that feeds the other unit. The first step is a camera inspection to map which grilles belong to which apartment, so the sealant goes on the leaks and nowhere else. Flow to both units stays intact when the work is done right. Call (855) 410-4866 for an estimate.
Condensation is the cause, and it’s a seasonal thing in Corona because the summers are sticky and the basement stays cool and damp. Cold air moving through an under-insulated run meets that warm humid air, water forms on the metal, and the joints lose their seal year after year. Replacing the insulation and resealing the joints closes the cycle. Call (855) 410-4866 for a free assessment.
Usually repair is worth it. Original sheet-metal ductwork in Corona’s pre-war rowhouses was built thicker than a lot of what’s installed today, and when it’s structurally sound, resealing joints with mastic sealant restores it. Replacement is the right call when a run is rusted through or sized wrong for the system, but that’s a smaller share of the jobs we see. A written estimate will tell you which applies.
A camera inspection inside the run settles it. A flex line with a single dent can usually be re-supported and reconnected. One that’s pinched flat, torn or crushed along most of its length needs a new run, because you can’t restore airflow through a collapsed tube. The inspection happens before the estimate, so you know which one you’re paying for. Call (855) 410-4866 to schedule it.
Yes, because in a shared Corona system the leaks are the pathway. Every unsealed joint in a basement plenum or a split return pulls air from wherever the pressure pulls it, which in attached housing means a neighboring unit’s air, kitchen odors and dust from cavities. Sealing closes that pathway at the source, and the EPA’s figure is a reason to close it. The repair itself is the answer, not a filter slapped on top. Call (855) 410-4866 for an exact quote on sealing your system.
Get a Free Duct Repair Estimate in Corona
If your Corona home has rooms that never heat right, a basement that smells like someone else’s kitchen, or ductwork you’ve never had inspected in a shared building, an assessment is the place to start. We map the runs, show you what a camera sees and put the repair scope and price in writing before any work starts. Our technicians have up to 13 years of experience and carry Rotobrush and Nikro equipment, and we seal with mastic rather than tape. Call (855) 410-4866 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Elmhurst Air Duct Cleaning.